Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Forums User List Calendar Active Threads Search Forum Help
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
99 sport into 93 max #969561 10/26/09 06:34 PM
Joined: Jul 2007
Posts: 54
va
M
mitsumonki Offline OP
Getting the Wheeling Fever
will a 99 sport 3.0 bolt to the 93 3.0 trans?
Re: 99 sport into 93 max [Re: mitsumonki] #969562 10/27/09 02:26 AM
Joined: Jan 2008
Posts: 985
Kansas
1
1986powerram50 Offline
Rock Warrior
*****
Should let us know how it works out tho!!

--keRby

Ad Inexplorta
Re: 99 sport into 93 max [Re: 1986powerram50] #969563 10/27/09 02:32 AM
Joined: Sep 2004
Posts: 4,479
Williamsport PA
StockRaider Offline
Roll Me Over
***
All 3.0 3.5 and 3.8 blocks have the same bellhousing and motor mount mounting locations. So yes, from what I have seen it should bolt in. BUT the biggest problems you would have is the electronics matching up. might have to use the MM intake.

Richard E
1989 Montero - Stock-ish
1989 V6 Auto Raider - 5.3 Vortech Swap.
1987 Mitsubishi Starion 2.6t, soon to be 3.5
1983 Honda XL600R
Re: 99 sport into 93 max [Re: mitsumonki] #969564 10/27/09 02:43 AM
Joined: Mar 2003
Posts: 2,324
SLO County, CA 93453
K
KrzyDav Offline
Body Damage is Cool
*****
I thought about useing the 24 valve quite a few years back, untill I learned of all the stuff I'd have to do, esp. in CA to meet emmissions.
Whole wiring harness and ECU and stuff like drilling/ welding 4 O2 sensor mounts for the 24valve setup.
If I was gonna go to all that trouble I'd get the 3.5 or 3.8 SOHC.

dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.
Re: 99 sport into 93 max [Re: KrzyDav] #969565 10/27/09 04:53 AM
Joined: Jul 2007
Posts: 54
va
M
mitsumonki Offline OP
Getting the Wheeling Fever
yeah 3.5 would be nice but i might get a good deal on a whole sport that was rolled
Re: 99 sport into 93 max [Re: mitsumonki] #969566 10/27/09 06:34 PM
Joined: Sep 2006
Posts: 2,712
East Wallyworld Vermont
OldColt Offline
Roll Me Over
*****
That 99 Sport engine will bolt up to the bellhousing fine. The side mounts may be a bit different though and may need some mix& match to bolt up.

That swap will make a nice driving pickup.

Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.
Re: 99 sport into 93 max [Re: OldColt] #969567 10/28/09 02:04 AM
Joined: Jan 2008
Posts: 985
Kansas
1
1986powerram50 Offline
Rock Warrior
*****
FYI: I was told by a fellow on outerlimits, that the 6g72 and 6g74 have slightly different mounts. That require some modification.

--keRby

Ad Inexplorta
Re: 99 sport into 93 max [Re: 1986powerram50] #969568 10/29/09 11:25 PM
Joined: Jul 2007
Posts: 54
va
M
mitsumonki Offline OP
Getting the Wheeling Fever
well i bought it and started tearing it down

the big harness up to is the ecm harness the bottom one is for the dash switches and junk

[Linked Image] [Linked Image] [Linked Image] [Linked Image]
Re: 99 sport into 93 max [Re: mitsumonki] #969569 10/29/09 11:31 PM
Joined: Jul 2007
Posts: 54
va
M
mitsumonki Offline OP
Getting the Wheeling Fever
so my plan is to have complete obd2 with the bigger sport gas tank and evaporate system.
what else should i try and swap over?
I was thinking power door locks would be nice <img src="/forums/images/graemlins/smile.gif" alt="" />
the front wishbones are toast but the brakes seem ok.
are they bigger?
Re: 99 sport into 93 max [Re: mitsumonki] #969570 10/29/09 11:43 PM
Joined: Mar 2003
Posts: 2,324
SLO County, CA 93453
K
KrzyDav Offline
Body Damage is Cool
*****
I look forward to you doing a "how to" ... <img src="/forums/images/graemlins/kewl.gif" alt="" />
Maybe someday I'll do something like that , that is if I can move outta CA.
I'm still getting by with my crank snout damaged 3.0 12 valve. When the leaks finally cause my T-belt to break or bearings to seize maybe I'll do a 3.5 SOHC. I find more wrecked 2wd M.S.s than other mitsus in the yards anyway.
God luck <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />

dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.
Page 1 of 2 1 2

Moderated by  4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed 
Forum Rules · Mark All Read Contact Us · 4x4Wire TrailTalk


4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 16 (0.004s) Memory: 0.6402 MB (Peak: 0.7636 MB) Data Comp: Off Server Time: 2026-06-07 09:04:17 UTC
Valid HTML 5 and Valid CSS