advice need on 4.0 exhaust manifold

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: advice need on 4.0 exhaust manifold [Re: KrzyDav] #969614 10/27/09 02:11 AM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

I'd prolly weld it if it was mine.. But then a STAINLESS one like this one for only $70. delivered might make me go thataway.
http://cgi.ebay.com/ebaymotors/96-97-98-...sQ5fAccessories
Big Jim

professional bovine relocation specialist

Entire Thread
Subject	Posted By	Posted
advice need on 4.0 exhaust manifold	KrzyDav	10/27/09 02:00 AM
Re: advice need on 4.0 exhaust manifold	BigJim	10/27/09 02:11 AM
Re: advice need on 4.0 exhaust manifold	4x4Wire	10/27/09 10:18 AM
Re: advice need on 4.0 exhaust manifold	sunder	10/28/09 07:44 PM
Re: advice need on 4.0 exhaust manifold	fresnodb	10/29/09 07:48 PM
Re: advice need on 4.0 exhaust manifold	KrzyDav	10/30/09 11:21 PM
Re: advice need on 4.0 exhaust manifold	fresnodb	01/25/10 11:26 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.464s Queries: 16 (3.462s) Memory: 0.6050 MB (Peak: 0.6380 MB) Data Comp: Off Server Time: 2026-06-15 23:14:00 UTC
Valid HTML 5 and Valid CSS