advice need on 4.0 exhaust manifold

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: advice need on 4.0 exhaust manifold [Re: sunder] #969617 10/29/09 07:48 PM

Joined: Jun 2006

Posts: 56

Fresno, CA

fresnodb

Getting the Wheeling Fever

Had one cracked so bad that it wouldn't pass smog. My son (the other guy) took it off and we had a local muffler shop buddy weld it right ($35.00). That was over a year ago and over a lot of rocks and still no re-crack!

Entire Thread
Subject	Posted By	Posted
advice need on 4.0 exhaust manifold	KrzyDav	10/27/09 02:00 AM
Re: advice need on 4.0 exhaust manifold	BigJim	10/27/09 02:11 AM
Re: advice need on 4.0 exhaust manifold	4x4Wire	10/27/09 10:18 AM
Re: advice need on 4.0 exhaust manifold	sunder	10/28/09 07:44 PM
Re: advice need on 4.0 exhaust manifold	fresnodb	10/29/09 07:48 PM
Re: advice need on 4.0 exhaust manifold	KrzyDav	10/30/09 11:21 PM
Re: advice need on 4.0 exhaust manifold	fresnodb	01/25/10 11:26 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.489s Queries: 16 (3.487s) Memory: 0.6046 MB (Peak: 0.6376 MB) Data Comp: Off Server Time: 2026-06-19 09:31:20 UTC
Valid HTML 5 and Valid CSS