Cool Chip.

I would say you should have 3 mounts to the frame and make sure you brace the sliders inbetween the 2 bars a few times. Otherwise you wind up like my friend who bent his slider b/c it was only welded at each end.

Ideally looking something like this:

TRUCK
frame mount [] [] []
slider ----------------
supports [] [] []
slider ----------------

Last edited by CJMT100; 11/15/09 11:48 PM.
1996 T100, Mickey Thomson Classics, Bridgestone Dueler AT 265/75/16, custom offroad KC's.