I was thinking of the same thing Sparky. Pretty sure it was Don.

TOASTY, is that a Mitsu idler arm? The reason I ask is that I replaced my old factory arm for an eBay arm and I bent it the first mine I wheeled with it. The old factory arm never bent so I replaced it with a Mistu unit ($90) and all has been well.

One thing I noticed on the Mitsu arm is that the shaft is not long enough to add a bracket like the one Sparky linked to.

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...