Quote
I just took a closer look at the u-joint and pinion flange. It's definitely larger than what's on the Gen1 V6 Raider. The flange also looks like it would be very likely to hang up on a rock or be subject to damage more so than the smaller version.

Are the later SR locking differentials with the smaller pinion flange also 9.5"?

Frank



That SR axle will fit in your truck if it's a late 95 model and yes the pinion flange is larger, but it will fit.

Here's how to tell. Measure the u-joint on the SR and compare that to your truck. They use the same joint.

That flange is not going to hang up on a rock, if so, there would be a lot of Gen II's and modified Gen I's in trouble.

All SR's locking differentials are the same size, as far as I know.

Michael j

TreadLightly! Trainer

Grasscat III, 1994 Gen 2 Five speed, Stock ( for a little while )

GrassCat II, 1998 Gen 2.5 Locked and loaded. Ran off with Hector.

GrassCat I, 1991 Gen 1 Ran off with Justice.