Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Roll cage For Mitsubishi Montero SWB [Re: sparkem] #973286 11/23/09 06:45 AM
Joined: Dec 2007
Posts: 87
themacway Offline
Getting the Wheeling Fever
you can see mine in my driveway. lol! yep, it's rolled at least once, maybe twice, cain't harlee remember... ha! body damage is cool!
seriously, lost the windshield and mirrors, but NO interior damage, even the door panels and roof headliner are still perfect. i don't have a sunroof though. that could be hard to realign or whatnot, but if you JUST want seat belt mounts, do a seat belt bar behind the front seats. i had one mounted in my porsche 944 when i auto-x it way back when. took it out when i removed the racing corbeau's for the factory leather seats. was great for the 5-point belts we had to run. pretty easy to build and mount, so it'd be the way to go just for that. i did have to use a certain grade of metal, iirc, for porsche spec. racing. i don't know about 4x4 meet requirements though... jack b :-)


'89 raider v-6, blue w/blue-grey, auto, superwinch hubs, a/c, cruise/tilt, bouncy, big wheels/tires/suspension and kewl ol' school trailmaster motorsport grill guard and body damage! now with a yammie xt600e duallie mounted across the rear.
Re: Roll cage For Mitsubishi Montero SWB [Re: GreatWhiteShark] #973287 11/23/09 03:21 PM
Joined: Jun 2003
Posts: 7,356
MontyMcV Offline
Trail Leader
Check the rear of yours, above the side windows. Is there a round cap in the trim? There SWBs that came with 3-way rears, and some that have been retro'd into existing mointing points. Not sure if earlier SWBs had them. My 87 is retro'd.


Big Truck: 00, 3.5, Endeavor, 5-Spd drive line in hand!
Little Truck: 87, 2.6T I/C, MT, LSDs, Tonneau Top
Her Truck: 03, 3.8, 20th Anniv, 65k
Daughter's: 06 Eclipse, Keeping it Mitsu!
FSMs: MitsubishiLinks.com
Re: Roll cage For Mitsubishi Montero SWB [Re: MontyMcV] #973288 11/24/09 09:30 PM
Joined: Mar 2003
Posts: 2,324
K
KrzyDav Offline
Body Damage is Cool
*****
John Baker used to sell a SWB roll bar. Wonder where they went,,,


dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.
Re: Roll cage For Mitsubishi Montero SWB [Re: KrzyDav] #973289 11/25/09 12:17 AM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
Quote
John Baker used to sell a SWB roll bar. Wonder where they went,,,


John Baker didn't make much money from the mitsu crowd... at least that's what he told me when I spoke with him.

From what I learned from my research and from speaking with others who bought stuff from him, there were only a few things he actually made and sold online. The rest he resold from other manufacturers just like any other reseller(Sway Away Torsion Bars, etc.).

His biggest problem though was that he marked up the prices higher than what most other places sold them for.

That said he didn't sell much mitsu stuff and eventually stopped carrying unique Mitsu products and switched to selling Ford Explorer products and selling off the remains of his Mitsu inventory as time went on. IIRC he also sold Tractors and other farm implements so I suspect that's what he's selling now.

To get back on topic, for the Roll cage I'd be interested in an exo versus an internal roll cage but only if I ever finish the basic mods then get a wild enough hair <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> to make my rig dedicated solely for off road use. Not happening yet but it's getting close.


Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page
Re: Roll cage For Mitsubishi Montero SWB [Re: off-roader] #973290 11/25/09 04:47 AM
Joined: Nov 2009
Posts: 79
GreatWhiteShark Offline OP
Getting the Wheeling Fever
Quote


To get back on topic, for the Roll cage I'd be interested in an exo versus an internal roll cage but only if I ever finish the basic mods then get a wild enough hair <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> to make my rig dedicated solely for off road use. Not happening yet but it's getting close.



Right on ! <img src="/forums/images/graemlins/kewl.gif" alt="" />

Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6185 MB (Peak: 0.7004 MB) Data Comp: Off Server Time: 2026-05-29 15:19:37 UTC
Valid HTML 5 and Valid CSS