Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
leaf spring issue #973966 11/26/09 03:55 AM
Joined: Sep 2004
Posts: 270
xrtim Offline OP
Mudrunner
Have late model Tacoma leafs on the rear of my '81 Toyota. Driverside rear is having a problem. The lowest/thickest leaf won't stay in line with the rest of the pack. It turns. I've tried re-tourqing the U-bolts and it still moves after a run. Anybody know what the deal is? The passenger side does not do this. The same thing happened with my old leafs to the point that it rubbed on the tire and blew it. Seems the new ones want to do the same but they are angled different and can't actually contact the tire. Any suggestions?

Re: leaf spring issue [Re: xrtim] #973967 11/26/09 04:49 AM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
You could try putting a spring clamp on one end of the other to hold the bottom leaf in line with the rest of the pack. Either drill the end of the leaf and bolt/rivet in a clamp or use one of the bendable clamps. I added a clamp to the back end of my front springs:

[Linked Image]

Re: leaf spring issue [Re: 4Crawler] #973968 11/27/09 06:11 PM
Joined: Sep 2004
Posts: 270
xrtim Offline OP
Mudrunner
I could do that but the design of this spring is such that it is several inches away from the rest of the pack. In fact, it's inverted a bit because the last leaf is actually like an overload leaf. I've looked at the original truck they came on and everything is correct. I need to keep it in the pack but wish it wouldn't turn. I may go the spring keeper route but wanted to investigate first because they didn't come that way stock. Something is going on with my truck and I wanna figure it out. Thanks for the info a pics though.

Re: leaf spring issue [Re: xrtim] #973969 11/27/09 11:51 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
The earlier rear springs have a tall spring clamp on the end of the overload leaf. It is tall enough to reach the top of the spring pack and has a sleeve and bolt that go over the top. It helps keep the spring in line and also works as an anti-wrap device as the back end of that leaf bends down under load, it pulls on the rear of the spring pack.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.013s Queries: 15 (0.010s) Memory: 0.6042 MB (Peak: 0.6607 MB) Data Comp: Off Server Time: 2026-11-16 03:35:22 UTC
Valid HTML 5 and Valid CSS