LIfters (hydraulic valve lash adjusters), gotta do it, not much $$

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech LIfters (hydraulic valve lash adjusters), gotta do it, not much $$

Print Thread

Rate Thread

Re: LIfters (hydraulic valve lash adjusters), gotta do it, not much $$ [Re: fasteddy] #973984 11/26/09 06:12 PM

Joined: Nov 2009

Posts: 18

Montana

mthuntnow

Need a Spot

I completely understand that the 3mm is the improved version, I just can't hardly believe the price. The whole set for around $100? when the others are around $30-$40 ea. Basically, sometimes e-bay is truly too good to be true and I'm not too familiar with the aftermarket world. I do see that the cap crimp looks a little better on some of the more expensive ones but I don't know that it matters.

95 SR + 94 SR Might =1 SR.

Entire Thread
Subject	Posted By	Posted
LIfters (hydraulic valve lash adjusters), gotta do it, not much $$	mthuntnow	11/26/09 04:57 PM
Re: LIfters (hydraulic valve lash adjusters), gotta do it, not much $$	fasteddy	11/26/09 05:38 PM
Re: LIfters (hydraulic valve lash adjusters), gotta do it, not much $$	mthuntnow	11/26/09 06:12 PM
Re: LIfters (hydraulic valve lash adjusters), gotta do it, not much $$	FrankR	11/26/09 06:37 PM
Re: LIfters (hydraulic valve lash adjusters), gotta do it, not much $$	4ePikanini	11/26/09 08:47 PM
Re: LIfters (hydraulic valve lash adjusters), gotta do it, not much $$	mthuntnow	11/26/09 09:36 PM
Re: LIfters (hydraulic valve lash adjusters), gotta do it, not much $$	mthuntnow	11/27/09 05:16 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: