Rear Brakle Lines Rusted

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear Brakle Lines Rusted [Re: GreyDuck] #974568 12/02/09 12:49 AM

Joined: Sep 2006

Posts: 981

CJMT100

Rock Warrior

I would cut the lines from a part where it isnt rusted and use a compression fitting there.

1996 T100, Mickey Thomson Classics, Bridgestone Dueler AT 265/75/16, custom offroad KC's.

Entire Thread
Subject	Posted By	Posted
Rear Brakle Lines Rusted	GreyDuck	12/01/09 11:41 PM
Re: Rear Brakle Lines Rusted	CJMT100	12/02/09 12:49 AM
Re: Rear Brakle Lines Rusted	4x4runner	12/02/09 01:38 AM
Re: Rear Brakle Lines Rusted	CJMT100	12/02/09 05:19 AM
Re: Rear Brakle Lines Rusted	MAC	12/03/09 08:26 PM
Re: Rear Brakle Lines Rusted	CJMT100	12/04/09 04:14 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.507s Queries: 16 (3.505s) Memory: 0.6021 MB (Peak: 0.6351 MB) Data Comp: Off Server Time: 2026-06-14 16:30:40 UTC
Valid HTML 5 and Valid CSS