Rear Brakle Lines Rusted

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear Brakle Lines Rusted [Re: CJMT100] #974569 12/02/09 01:38 AM

Joined: Feb 2002

Posts: 163

North Carolina

4x4runner

Wheeler

I just went through the same deal on my '95 4 runner. I ordered the factory beake lines from the dealer, but they were not the same as the factory lines. I ended up cuttin g the rusted line and installed a compression fitting. My brakes are great and no leaks. Cost me about $4.00 and was much easier than replacing the entire brake line.

Entire Thread
Subject	Posted By	Posted
Rear Brakle Lines Rusted	GreyDuck	12/01/09 11:41 PM
Re: Rear Brakle Lines Rusted	CJMT100	12/02/09 12:49 AM
Re: Rear Brakle Lines Rusted	4x4runner	12/02/09 01:38 AM
Re: Rear Brakle Lines Rusted	CJMT100	12/02/09 05:19 AM
Re: Rear Brakle Lines Rusted	MAC	12/03/09 08:26 PM
Re: Rear Brakle Lines Rusted	CJMT100	12/04/09 04:14 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.474s Queries: 16 (3.472s) Memory: 0.6030 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-11 15:45:51 UTC
Valid HTML 5 and Valid CSS