locking hubs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

locking hubs #978377 12/29/09 04:15 AM

Joined: Dec 2008

Posts: 66

minydigger Offline

Getting the Wheeling Fever

I have a club run coming up we are all going down to the beach for new years and I have not gotten my new hubs yet. Of course the stocks don't work, question is can i take a stock set of none vacuum hubs and permanently lock them? My plan is to drive to beach take off vacuum hubs and swap out to locked ones and when done vise versa.

94 Zj custom suspension and other stuff
01 F250 tow hoe 5" exhaust
00'sporty 3" lift 235's

Entire Thread
Subject	Posted By	Posted
locking hubs	minydigger	12/29/09 04:15 AM
Re: locking hubs	DamKia	12/29/09 08:53 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.425s Queries: 15 (3.423s) Memory: 0.5941 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-05-30 06:00:48 UTC
Valid HTML 5 and Valid CSS