Quote
as the subject states i have just done an engine swap with a motor from a 98 model (including the computer.
I unplugged the wiring from the computer and pulled the wiring through the firewall then pulled the motor out then reinstalled the new motor plugged it all in and it wont start (i made sure the O2 sensor was plugged in as well)
So now it is a game of trial and error to figure this out so if anyone has any suggestions i would be most greatful


In AU, what is the difference in the engine between the 97 and 98?

Why did you change the wiring?

Could have broken wires with all the pulling.

Are you getting spark, fuel, injectors firing, is your computer getting power? You need to do some basic investigation and report your findings before we can help you.

Unless someone has done this and had the same issues, then they may have found a quick fix of which they will be happy to post.

Let us know what you have after investigation of the basics other than it won't start.

Everet <img src="/forums/images/graemlins/patriot.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />

WWW.UPYOURKIA.COM White 96,4x4, man.hubs,K&N filter,3row rad, twin 16" fans, 3" body lift, 4" UPYOURKIA LIFT KIT,265/75 16 TreadWrights on DC2 wheels,140 amp alt. dual batts.