rear brake caliper pin snapped in holder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: rear brake caliper pin snapped in holder [Re: hdmaster5312] #978940 01/03/10 01:49 PM

Joined: Mar 2005

Posts: 1,006

South East U.S.A.

pcc

Body Damage is Cool

Are you talking about the slide pin? Did it snap off so that the slide is stuck in the caliper bore? Or did it snap off at the threaded part so you need to unthread it?

92 Montero LS 3.0L V6 Auto, Stock, Original owner, 185,800K miles

Entire Thread
Subject	Posted By	Posted
rear brake caliper pin snapped in holder	hdmaster5312	01/02/10 06:36 PM
Re: rear brake caliper pin snapped in holder	hazy_daze	01/03/10 12:52 AM
Re: rear brake caliper pin snapped in holder	pcc	01/03/10 01:49 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.842s Queries: 16 (3.489s) Memory: 0.5965 MB (Peak: 0.6295 MB) Data Comp: Off Server Time: 2026-05-31 06:19:17 UTC
Valid HTML 5 and Valid CSS