Transfer case rear out put flange loose

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Transfer case rear out put flange loose [Re: 510rcr] #978952 01/09/10 12:41 AM

Joined: Feb 2001

Posts: 402

Folsom, CA

whitetoy

Mudrunner

Don't ignore it. I did, thinking that the leak was just a bad seal. Didn't realize that the nut had come un-staked, and started to back out. It let me know, when it backed out completely while driving one day. Only time my rig had to be towed.

Rick
1984 4Runner

Entire Thread
Subject	Posted By	Posted
Transfer case rear out put flange loose	510rcr	01/03/10 05:20 AM
Re: Transfer case rear out put flange loose	4Crawler	01/03/10 05:35 AM
Re: Transfer case rear out put flange loose	510rcr	01/03/10 05:38 AM
Re: Transfer case rear out put flange loose	whitetoy	01/09/10 12:41 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.442s Queries: 16 (3.440s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-05-30 17:20:43 UTC
Valid HTML 5 and Valid CSS