More or less mounting I've got my 4links ready to set up but mounting anything I need to taking in consideration before getting to carried away im using 2x2" square tubing with 1/4" wall. For my links with 2.63" johnny joints im looking at driveability not a DD but to work our around town to fight the wheeling fever off every once in awhile. The links are cut into a generic 5'3" long im assuming upper links a bit shorter but I am trying to get the most out of the suspension which is FOA 18" 2.5" coilovers. Im looking at tilting the rear axle a bit to relieve stress off the pionion angle and ......im just looking for anyone that's done this or has a working knowledge of this type suspension.