Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Forums User List Calendar Active Threads Search Forum Help
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 4 of 6 1 2 3 4 5 6
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: off-roader] #979799 02/04/10 05:44 PM
Joined: Jan 2002
Posts: 6,134
Gilbert AZ, US.
TOASTY Offline
Trail Leader
*****
like angelo said cut a piece of square tube to make a boxed in little tryangle it's stronger.

I recommend notching the pinch weld on the rocker panel to clear the legs of the sliders, that way you keep as much clearance as possible. *Don't do this if you bought HREW tubing sliders, they WILL bend so keep them an inch or more away from the door seal.

1999 Montero SAS'd on Kings and stuff

1998 Montero trying to get a V8 Swapped
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: off-roader] #979800 02/04/10 07:41 PM
Joined: Jun 2002
Posts: 6,211
Apache Junction, AZ
JohnnyBfromPeoria Offline
Trail Leader
*****
Off-Roader, you must really have some plans I don't understand...please elaborate. 78" is w-a-y too long, so there's some cutting in your future?

John B.
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: JohnnyBfromPeoria] #979801 02/04/10 08:19 PM
Joined: Feb 2002
Posts: 3,548
Charlotte NC
Angelo Offline
Roll Me Over
***
Ray plans on taking the tires off and making it into a Monty sled pulled by Clydesdales for the winter months! <img src="/forums/images/graemlins/lol.gif" alt="" />

99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: JohnnyBfromPeoria] #979802 02/04/10 08:34 PM
Joined: Jan 2000
Posts: 16,227
Bay Area, CA
off-roader Offline OP
Web Wheeler
*****
Quote
78" is w-a-y too long, so there's some cutting in your future?


YUP <img src="/forums/images/graemlins/evil.gif" alt="" />

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: off-roader] #979803 02/04/10 08:53 PM
Joined: Jun 2002
Posts: 6,211
Apache Junction, AZ
JohnnyBfromPeoria Offline
Trail Leader
*****
[Linked Image]

The middle size should work well for me. I'll post pictures when I have Toasty weld 'em on.

John B.

'87 Raider 2.6 Turbo Auto, Under Construction
'95 Montero SR, 35x12.5/15 BFG M/T KM-2's, Rock sliders, Qtr panel chop, gas tank lift, 2" BL, Aisins, 5.29s
'95 Pajero Mini
'98 Montero Winter Ed.
'04 Cadillac XLR
'03 Kawasaki ZRX1200R
'60 Ford Falcon 4Dr
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: JohnnyBfromPeoria] #979804 02/04/10 09:36 PM
Joined: Jun 2002
Posts: 6,211
Apache Junction, AZ
JohnnyBfromPeoria Offline
Trail Leader
*****
And, I've already got a UPS tracking number. These guys don't mess around!

John B.
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: Angelo] #979805 02/04/10 11:21 PM
Joined: Dec 2008
Posts: 259
Los Angeles, CA
N
NickR Offline
Mudrunner
*****
Quote
Ray plans on taking the tires off and making it into a Monty sled pulled by Clydesdales for the winter months! <img src="/forums/images/graemlins/lol.gif" alt="" />


<img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" />

1987 Dodge Raider, stick on 33", 2.5" BL, Con-ferr roof rack, Hella driving lights & pencil beam lights.

Stuff collecting dust in the garage
SR Axle
LSD 3rd member
Early Gen 1 Bouncy seat
Early Gen 1 two piece rear bumper
2 sets of SWB Gen I rear seat-belts.
Set of Aisin Hubs.
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: NickR] #979806 02/04/10 11:58 PM
Joined: Jan 2000
Posts: 16,227
Bay Area, CA
off-roader Offline OP
Web Wheeler
*****
Quote
Quote
Ray plans on taking the tires off and making it into a Monty sled pulled by Clydesdales for the winter months! <img src="/forums/images/graemlins/lol.gif" alt="" />


<img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" />


Clydesdales? Forget that. We're talking JATO's baby! <img src="/forums/images/graemlins/evil.gif" alt="" />

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: off-roader] #979807 02/05/10 03:47 PM
Joined: Feb 2002
Posts: 3,548
Charlotte NC
Angelo Offline
Roll Me Over
***
<img src="/forums/images/graemlins/lol.gif" alt="" /> It was a thought!

Here is the pics of the brackets on each of the 8 legs. Orginally it came with 6 legs, but I didnt think that was enough since originally it was for a Toyota which weigh much less. I asked him how much more 2 legs would be, and he included them for no extra cost, what a swell guy! Anywho, here are the pics. The brackets look wider/taller in person. But you get the idea. Note, there are some small rust spots, but thats only temporiary. I'll be taking them off this summer and putting a couple coats on them. Dare I color match?!?! <img src="/forums/images/graemlins/wink.gif" alt="" /> <img src="/forums/images/graemlins/nana.gif" alt="" /> nahhhh <img src="/forums/images/graemlins/lol.gif" alt="" />


[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]

99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
Re: 96SR Rocker Panel Protection... AKA Sliders [Re: TOASTY] #979808 02/05/10 04:09 PM
Joined: Apr 2006
Posts: 3,607
An Englishman in Huntersville ...
Mad_Scientist Offline
Roll Me Over
*****
Quote
I recommend notching the pinch weld on the rocker panel to clear the legs of the sliders, that way you keep as much clearance as possible.


That's what I've done on mine <img src="/forums/images/graemlins/kewl.gif" alt="" />

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
Page 4 of 6 1 2 3 4 5 6

Moderated by  4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed 
Forum Rules · Mark All Read Contact Us · 4x4Wire TrailTalk


4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.004s) Memory: 0.6471 MB (Peak: 0.7739 MB) Data Comp: Off Server Time: 2026-06-10 11:31:43 UTC
Valid HTML 5 and Valid CSS