Quote
I recommend notching the pinch weld on the rocker panel to clear the legs of the sliders, that way you keep as much clearance as possible.


That's what I've done on mine <img src="/forums/images/graemlins/kewl.gif" alt="" />

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...