V6 Fuel Pump Repair - did I just make a mistake?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: V6 Fuel Pump Repair - did I just make a mistake? [Re: FrankR] #982735 01/29/10 03:42 PM

Joined: Nov 2004

Posts: 391

Oak Ridge, TN

87_Montero Offline

Mudrunner

Thanks for recommending the test!

The Rustoleum Cold Galvanize spray paint softens when exposed to gasoline. So my next step will be to strip it back off again.

The "Rust Converter" underneath the Cold Galvanize seems unaffected by gasoline.

I'll send an update when I get the Cold Galvanize off.

DDs:
Projects: 86 Ram50

Entire Thread
Subject	Posted By	Posted
V6 Fuel Pump Repair - did I just make a mistake?	87_Montero	01/27/10 05:21 AM
Re: V6 Fuel Pump Repair - did I just make a mistake?	FrankR	01/27/10 12:29 PM
Re: V6 Fuel Pump Repair - did I just make a mistake?	87_Montero	01/28/10 02:37 PM
Re: V6 Fuel Pump Repair - did I just make a mistake?	87_Montero	01/29/10 03:42 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.839s Queries: 16 (3.836s) Memory: 0.5974 MB (Peak: 0.6304 MB) Data Comp: Off Server Time: 2026-11-07 04:11:48 UTC
Valid HTML 5 and Valid CSS