I'm about to order a box of longer bolts to use on the UCA of my Gen1. The longer bolt is necessary to allow additional shims to correct the camber after a torsion bar crank.

The bolts are 12mm x 1.25 x 70mm, grade 10.9.

Is 70mm a good length? I've read that the stock bolts are 55mm but I haven't confirmed it myself.

My cost is going to be about $4/each after shipping.

Anyone else need some?

89 Raider V6 manual
89 Montero 2-door Coupe "Super Legera"
91 Montero 4-door manual (Mint! Sunroof, cruise, power everything, BOUGHT FROM THE ORIGINAL OWNER!)