Pivot bolt for Alternator

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Pivot bolt for Alternator #985377 02/13/10 09:58 PM

Joined: Feb 2006

Posts: 266

Ontario Canada

bill_bly_ca Offline

Mudrunner

Hi Guys

Looks like the pivot bolt for my alternator shook out..

I bought a standard thread M10 25mm long bolt but it is not catching the threads (hand tightening)

Do I have the right bolt ?? If I do then I guess the threads possibly buggered then?

97 Prado (LC 90 series) JDM import 2020 --- 2000 Galloper II SWB under offer from Korea
88 Mits Pajero LWB 185000Km 2.5TD JDM import (SOLD)

Entire Thread
Subject	Posted By	Posted
Pivot bolt for Alternator	bill_bly_ca	02/13/10 09:58 PM
Re: Pivot bolt for Alternator	Bernoulli	02/14/10 06:33 AM
Re: Pivot bolt for Alternator	bill_bly_ca	03/23/10 11:28 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.928s Queries: 15 (3.407s) Memory: 0.5973 MB (Peak: 0.6302 MB) Data Comp: Off Server Time: 2026-06-02 05:37:23 UTC
Valid HTML 5 and Valid CSS