2.3 to 2.6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.3 to 2.6 [Re: dadsamt] #985479 02/17/10 01:10 AM

Joined: Oct 2001

Posts: 4,016

Lafayette, IN

strawmyers Offline

Isuzu Moderator

The transmission will bolt up; but its more involved than that since the 2.3 is carb and the 2.6 is EFI. You'll need the computer and its associated wiring harness, at the least. Also the fuel pump is in-tank for the 2.6. Those are the two things that come to mind for the time being.

Sean Strawmyer
Back and ready to rock...... crawl.

From Indiana or surrounding states and interested in wheelin'? Check out www.mwior.com

Entire Thread
Subject	Posted By	Posted
2.3 to 2.6	dadsamt	02/15/10 02:27 AM
Re: 2.3 to 2.6	strawmyers	02/17/10 01:10 AM
Re: 2.3 to 2.6	mlclark	02/17/10 07:01 PM
Re: 2.3 to 2.6	mlclark	02/20/10 02:57 AM
Re: 2.3 to 2.6	bamashooter	02/21/10 02:12 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.373s Queries: 16 (3.371s) Memory: 0.6019 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-05-25 16:47:32 UTC
Valid HTML 5 and Valid CSS