2.3 to 2.6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.3 to 2.6 [Re: strawmyers] #985480 02/17/10 07:01 PM

Joined: Apr 2000

Posts: 7,268

Ventura County

mlclark

Isuzu Moderator

Search for posts by jlemond. I think you can put the 2.3 intake/carb on the 2.6 and then you don't have to deal with the wiring.

It can be done. You'll end up with a combination of the two engines, but IIRC, it is not that difficult to do.

Michael

Entire Thread
Subject	Posted By	Posted
2.3 to 2.6	dadsamt	02/15/10 02:27 AM
Re: 2.3 to 2.6	strawmyers	02/17/10 01:10 AM
Re: 2.3 to 2.6	mlclark	02/17/10 07:01 PM
Re: 2.3 to 2.6	mlclark	02/20/10 02:57 AM
Re: 2.3 to 2.6	bamashooter	02/21/10 02:12 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.315s Queries: 16 (3.420s) Memory: 0.6014 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-05-28 20:43:12 UTC
Valid HTML 5 and Valid CSS