Need more motivation. What have you done lately, Inspire me.

<img src="/forums/images/graemlins/lol.gif" alt="" /> No laser cut parts on this project, my Milwaukee port-a-band/drill press do the dirty work.

Here's a fone pic of this weekends work. <img src="/forums/images/graemlins/kewl.gif" alt="" />



<img src="/forums/images/graemlins/cheers.gif" alt="" />

Danny, I'm still trying to get my head wrapped around this off-roading stuff. <img src="/forums/images/graemlins/scared.gif" alt="" /> On your sliders, you only have 1 bar that runs front to rear, but most have 2 per side. In my head, since I've never seen them used,you have the frame, the middle bar and the rocker panel bar that allows it to slide over a tree or rock. Is your design going to make that happen? <img src="/forums/images/graemlins/confused.gif" alt="" /> Sorry, but like I said I've never seen them in use.

Not exactly sure what you mean, but the sliders are mainly there to protect the body. They should slide over things in the trail easily, although I thought about sheeting the bottoms with aluminum.

<img src="/forums/images/graemlins/cheers.gif" alt="" />

Well from the pics they look good. <img src="/forums/images/graemlins/kewl.gif" alt="" /> You're making me regret stripping the Monty back down to stock. <img src="/forums/images/graemlins/frown.gif" alt="" />
I do have a started Mighty Max and a good deal of interesting parts sitting around, however. <img src="/forums/images/graemlins/evil.gif" alt="" />

I'm looking forward to wheeling with the Max when it's done. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Finally got some more work done on the cage.



<img src="/forums/images/graemlins/cheers.gif" alt="" />

Thank you for posting the pics, awesome work!!

git er done! <img src="/forums/images/graemlins/kewl.gif" alt="" />

More progress on the cage.
Actually the cage is mostly done, just need to finish some welds, and paint. The chop will have to be finished before paint so it'll be a while. There's a wheeling trip in April I'm hoping to make so I have a deadline now. <img src="/forums/images/graemlins/zombie.gif" alt="" />

The final tubing, an x in the b hoop, with some bends to clear the front seats(I'm 6'3",need to lean back a lot <img src="/forums/images/graemlins/lol.gif" alt="" />).





Steering column mounted to dash tube, dash was gutted a little but bolts back on the same mounts. I lost dash vents for now, no room with the dash tube, I'll have to look into some flexible ducting, but not in a hurry, the defrost ductwork still fits.



<img src="/forums/images/graemlins/cheers.gif" alt="" />