Dual Mass Flywheel vs Old school Flywheel

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Dual Mass Flywheel vs Old school Flywheel #987012 02/23/10 08:54 PM

Joined: Feb 2010

Posts: 5

tomaco1

Need a Spot

I am in the process of fitting a 4D56T into a Mazda pickup.
The problem is that the motor came with a dual mass flywheel and I have heard bad things about them, reliability and life span wise. My question is, could I get a 1985 Ford Ranger diesel(4d55) flywheel and use it on my 4d56?

Entire Thread
Subject	Posted By	Posted
Dual Mass Flywheel vs Old school Flywheel	tomaco1	02/23/10 08:54 PM
Re: Dual Mass Flywheel vs Old school Flywheel	torquemonster	02/24/10 01:42 AM
Re: Dual Mass Flywheel vs Old school Flywheel	1986powerram50	02/24/10 03:10 AM
Re: Dual Mass Flywheel vs Old school Flywheel	CityYeti	02/24/10 07:06 AM
Re: Dual Mass Flywheel vs Old school Flywheel	tomaco1	02/25/10 09:27 PM
Re: Dual Mass Flywheel vs Old school Flywheel	CityYeti	02/26/10 06:29 AM
Re: Dual Mass Flywheel vs Old school Flywheel	tomaco1	02/26/10 03:22 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.385s Queries: 15 (3.383s) Memory: 0.6057 MB (Peak: 0.6387 MB) Data Comp: Off Server Time: 2026-05-27 08:57:33 UTC
Valid HTML 5 and Valid CSS