|
|
|
|
 1987 Samurai Front Hitch Receiver
#987513
02/26/10 05:30 PM
|
Joined: May 2008
Posts: 27
OP
Getting the Wheeling Fever
|
I'm helping a friend make a front hitch receiver to take a winch so he can install and remove it as required. I was surprised at how light the frame is on these rigs. Has anyone got any experience, advice or pictures of their own setup for this project?
Gerry
|
|
|
Re: 1987 Samurai Front Hitch Receiver
[Re: gerry_p]
#987514
04/25/10 07:10 AM
|
Joined: May 2007
Posts: 580
Rock Warrior
|
gerry
i put a winch on the front of my sidekick- early model- very much like a sammy, i think.
you are right. the things are pretty light.
i started off by welding a 2" angle iron across the body mount pads in front. that became the base for my "winch mount". some more bracing back to the frame.
seems a receiver would be similar.
gonna get fancy with some high amp plug in there?
richard
i got some pics, but someone probably has samurai pics, but you could probably start hacking and welding something that would be very functional. please post progress.
'94 "tracker", with some parts from suzi the psychic.
other modifications made, with more to come.
some intentional.
suzitoo should get me fishing.
kj6esv
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5860 MB (Peak: 0.6335 MB) Data Comp: Off Server Time: 2026-05-25 07:39:12 UTCValid HTML 5 and Valid CSS 