|
|
|
|
 For regear, save or send back cores?
#988270
03/03/10 03:33 PM
|
Joined: Nov 2008
Posts: 63
OP
Getting the Wheeling Fever
|
Hi everyone,
I'm finally ready to regear with lockers due to a good combination of circumstances.
I got a couple estimates, one from East Coast Gear Supply and one from Just Differentials.
ECGS is about $328 cheaper but I have to send the cores back within 3 weeks. JD will send the complete units and I don't have to send anything back to them. That means that I will have the older 4.10 3rds to swap back if needed. The thirds are in good shape as far as I know.
It's going to cost probably $50/3rd just to ship them back so the price savings is really more around $228.
So does anyone have any thoughts or advice? I saw in another thread that Eric was going to put the original 3rds back in before selling.
Thanks in advance.
Chip
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.400s Queries: 15 (3.411s) Memory: 0.5972 MB (Peak: 0.6301 MB) Data Comp: Off Server Time: 2026-05-29 22:57:39 UTCValid HTML 5 and Valid CSS 
