|
|
|
|
Re: vin #s for lsd
[Re: jays2001]
#988333
03/07/10 09:37 PM
|
Joined: Aug 2006
Posts: 894
Rock Warrior
|
hope you went ahead and ordered new bearings and seals both at the LSD and axles, your going to have it all torn apart anyway
2001 5sp. K&N stock filter 215/70/15 If your check engine light is on at least you know the light still works
|
|
Re: vin #s for lsd
[Re: bombardj1]
#988334
03/08/10 01:33 AM
|
Joined: Feb 2008
Posts: 244
OP
Wheeler
|
yes sir i did same thought i had its apart and in the air fix everything now none later. <img src="/forums/images/graemlins/kewl.gif" alt="" />
01 w/31 in. mtr,winch,elec.fan ,4 in.suspension lift and 4in. body lift,front and rear hitch. NOT ENOUGH POWER so V8 and solid axles coming soon.2013
|
|
Re: vin #s for lsd
[Re: jays2001]
#988335
03/28/10 12:56 AM
|
Joined: Feb 2008
Posts: 244
OP
Wheeler
|
well it is done finale today started it and finished in about three hours and a few <img src="/forums/images/graemlins/cheers.gif" alt="" /> later. the lsd was easy and my original was open even tho dealer said no i have photos will post of the hole deal in next day or so,the old one the pin down the spider gears was coming out and met the pinion gear and was not pretty.dont know what happen there but all fixed and better now <img src="/forums/images/graemlins/kewl.gif" alt="" /> cant wait to go wheeling on the 17 of next month <img src="/forums/images/graemlins/nana.gif" alt="" />
01 w/31 in. mtr,winch,elec.fan ,4 in.suspension lift and 4in. body lift,front and rear hitch. NOT ENOUGH POWER so V8 and solid axles coming soon.2013
|
|
Re: vin #s for lsd
[Re: jays2001]
#988336
05/09/10 08:45 PM
|
Joined: Feb 2008
Posts: 244
OP
Wheeler
|
|
01 w/31 in. mtr,winch,elec.fan ,4 in.suspension lift and 4in. body lift,front and rear hitch. NOT ENOUGH POWER so V8 and solid axles coming soon.2013
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 16 (0.006s) Memory: 0.6086 MB (Peak: 0.6810 MB) Data Comp: Off Server Time: 2026-10-30 15:19:52 UTCValid HTML 5 and Valid CSS