Fuso ring gear size = 9.5"=SR ring gears?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Fuso ring gear size = 9.5"=SR ring gears? [Re: lordtrunks] #988444 03/05/10 01:15 PM

Joined: Sep 2006

Posts: 2,712

East Wallyworld Vermont

OldColt

Roll Me Over

If any part numbers from within the diff are available, get the bearing numbers from the pinion and cross them to the SR. This may get close to answering if the gears will go in.

Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.

Entire Thread
Subject	Posted By	Posted
Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/04/10 09:36 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hazy_daze	03/04/10 10:12 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	lordtrunks	03/05/10 12:59 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/05/10 01:17 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	PHIL_	03/05/10 02:03 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	0778drz110	03/05/10 03:45 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	lordtrunks	03/05/10 03:58 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	OldColt	03/05/10 01:15 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	cmonty72	03/05/10 05:16 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	OldColt	03/05/10 05:28 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Mister Bishi	03/05/10 11:58 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Alex Kogan	03/06/10 01:04 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Mister Bishi	03/06/10 01:09 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Alex Kogan	03/06/10 01:40 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Alex Kogan	03/06/10 01:51 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hazy_daze	03/05/10 04:21 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	rxinhed	03/05/10 06:36 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	sparkem	03/05/10 03:56 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/05/10 06:13 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/10/10 08:04 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Angelo	03/10/10 10:33 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/10/10 02:39 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	TOASTY	03/10/10 05:54 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/10/10 06:48 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	PHIL_	03/11/10 02:31 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Angelo	03/12/10 08:51 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hochkis	03/04/10 10:17 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hazy_daze	03/04/10 10:55 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.872s Queries: 16 (3.869s) Memory: 0.6545 MB (Peak: 0.6933 MB) Data Comp: Off Server Time: 2026-11-04 10:49:03 UTC
Valid HTML 5 and Valid CSS