Fuso ring gear size = 9.5"=SR ring gears?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Fuso ring gear size = 9.5"=SR ring gears? [Re: Alex Kogan] #988451 03/06/10 01:51 AM

Joined: Apr 2000

Posts: 1,664

Portland, OR

Alex Kogan Offline

Body Damage is Cool

On subject of those mythical large 5.29 from Canter. I honestly don't really believe that. I would gladly have somebody prove me wrong on this one. I looked as far as web allows to go and didn't find any spec that would match Gen2/3/4 large diff.

92 SR, 285/75R16 Yoko MT ARB locker GAST compressor AirLift 1000 MM10500 Snorkel custom rear bumper
02 Montero LS died protecting the master
08 PowerWagon (stock!)

Entire Thread
Subject	Posted By	Posted
Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/04/10 09:36 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hazy_daze	03/04/10 10:12 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	lordtrunks	03/05/10 12:59 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/05/10 01:17 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	PHIL_	03/05/10 02:03 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	0778drz110	03/05/10 03:45 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	lordtrunks	03/05/10 03:58 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	OldColt	03/05/10 01:15 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	cmonty72	03/05/10 05:16 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	OldColt	03/05/10 05:28 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Mister Bishi	03/05/10 11:58 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Alex Kogan	03/06/10 01:04 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Mister Bishi	03/06/10 01:09 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Alex Kogan	03/06/10 01:40 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Alex Kogan	03/06/10 01:51 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hazy_daze	03/05/10 04:21 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	rxinhed	03/05/10 06:36 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	sparkem	03/05/10 03:56 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/05/10 06:13 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/10/10 08:04 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Angelo	03/10/10 10:33 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/10/10 02:39 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	TOASTY	03/10/10 05:54 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	off-roader	03/10/10 06:48 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	PHIL_	03/11/10 02:31 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	Angelo	03/12/10 08:51 AM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hochkis	03/04/10 10:17 PM
Re: Fuso ring gear size = 9.5"=SR ring gears?	hazy_daze	03/04/10 10:55 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.009s Queries: 16 (4.006s) Memory: 0.6554 MB (Peak: 0.6944 MB) Data Comp: Off Server Time: 2026-11-07 00:07:01 UTC
Valid HTML 5 and Valid CSS