|
|
|
|
 Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: Alex Kogan]
#988451
03/06/10 01:51 AM
|
Joined: Apr 2000
Posts: 1,664
Body Damage is Cool
|
On subject of those mythical large 5.29 from Canter. I honestly don't really believe that. I would gladly have somebody prove me wrong on this one. I looked as far as web allows to go and didn't find any spec that would match Gen2/3/4 large diff.
92 SR, 285/75R16 Yoko MT ARB locker GAST compressor AirLift 1000 MM10500 Snorkel custom rear bumper
02 Montero LS died protecting the master
08 PowerWagon (stock!)
|
|
|
Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: PHIL_]
#988452
03/10/10 08:04 AM
|
Joined: Jan 2000
Posts: 16,227
OP
Web Wheeler
|
Ray, where are your revs sitting at on the highway, in OD, at say, 60mpg, on 35s? Phil, to answer your question... Indicated Speed: 60mph RPM: ~2550 Actual Speed: 69mph Additionally... Indicated speed: 52mph RPM: ~2275 Actual Speed: 60mph
|
|
|
Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: off-roader]
#988453
03/10/10 10:33 AM
|
Joined: Feb 2002
Posts: 3,548
Roll Me Over
|
Ray, thats with 4.90's? Cause I'm about spot on with mine and my 35's
99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
|
|
|
Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: Angelo]
#988454
03/10/10 02:39 PM
|
Joined: Jan 2000
Posts: 16,227
OP
Web Wheeler
|
Ray, thats with 4.90's? Cause I'm about spot on with mine and my 35's No, 4.6's
|
|
|
Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: Angelo]
#988455
03/10/10 05:54 PM
|
Joined: Jan 2002
Posts: 6,134
Trail Leader
|
we're sead on because we started with 4.27's so 4.90 + 35's = correct speedo.
1999 Montero SAS'd on Kings and stuff
1998 Montero trying to get a V8 Swapped
|
|
|
Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: TOASTY]
#988456
03/10/10 06:48 PM
|
Joined: Jan 2000
Posts: 16,227
OP
Web Wheeler
|
we're sead on because we started with 4.27's so 4.90 + 35's = correct speedo. OK can you rephrase that first part except in English this time? <img src="/forums/images/graemlins/wink.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" />
|
|
|
Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: off-roader]
#988457
03/11/10 02:31 AM
|
Joined: Jan 2000
Posts: 7,309
Trail Leader
|
Oh c'mon Ray: sead=dead. <img src="/forums/images/graemlins/rolleyes.gif" alt="" /> Fan't wou sead Ainglish? My truck is off with the oe 31s, but within 3% on 33s. This is with 33s and 490s. Maybe they intended us to run the bigger tires. Oh, wait, not with less than 2 to 1 t-case! <img src="/forums/images/graemlins/lol.gif" alt="" />
|
|
|
Re: Fuso ring gear size = 9.5"=SR ring gears?
[Re: TOASTY]
#988458
03/12/10 08:51 AM
|
Joined: Feb 2002
Posts: 3,548
Roll Me Over
|
Ray, even with the 4.6's, that sounds like a big gap in the speedo range? I think with 4.27's I had in mine before the swap, I was getting figures like that. Couldnt imagine you being that far off from 4.90's. But maybe its diff cause of years? <img src="/forums/images/graemlins/confused.gif" alt="" />
99JAOS2"& OME 2"body 4.90s ARB HS9500i Skids&Ladder 16"315BFG JAOSRemote& Rack 3Row Rad IPF back& Searchlite HID Overhead Console/CB switchPanel FrARB RrLocker TJMSnorkel 160AAlt Sliders 2nd Tranny Cooler QuickAirII& Tank Rear frame/tank Lift
|
|
|
|
|
|
