Engine rebuild kits

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine rebuild kits [Re: FrankR] #990307 03/17/10 03:25 PM

Joined: Mar 2010

Posts: 136

shawnsdad

Wheeler

Quote

so its seeping past the rings.

#5 cylinder is a favorite place for a 3.0L head gasket to blow. I have seen suggestions that the 2 rear cylinders don't receive adequate coolant flow, but I'm not yet certain that's the reason.

cyl. 5 is where mine blew

many thanks
loren

92 montero rs 3.0 locked rear

Entire Thread
Subject	Posted By	Posted
Engine rebuild kits	93montero_sr	03/17/10 05:36 AM
Re: Engine rebuild kits	shawnsdad	03/17/10 05:46 AM
Re: Engine rebuild kits	FrankR	03/17/10 12:03 PM
Re: Engine rebuild kits	shawnsdad	03/17/10 03:25 PM
Re: Engine rebuild kits	93montero_sr	03/19/10 05:18 AM
Re: Engine rebuild kits	FrankR	03/19/10 10:30 AM
Re: Engine rebuild kits	93montero_sr	03/20/10 11:20 PM
Re: Engine rebuild kits	FrankR	03/21/10 11:11 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.532s Queries: 16 (3.530s) Memory: 0.6081 MB (Peak: 0.6411 MB) Data Comp: Off Server Time: 2026-06-08 22:59:15 UTC
Valid HTML 5 and Valid CSS