Alternator bearing part #?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Alternator bearing part #? [Re: 4runnerpilot] #990664 03/22/10 04:12 PM

Joined: Mar 2006

Posts: 749

Romulus, Michigan (Detroit)

MI_Mitsu

Rock Warrior

According to RockAuto, the bearing is a 302CC (an industry standard part number). It's the same for early Gen1 alternators as well in the 60-70A range. They show a 303CC bearing for a larger 110A alternator.

These bearings can be found at local bearing suppliers as well as online at places like RockAuto and even Amazon.

You'll pay about $15-20 though.

Jim

Entire Thread
Subject	Posted By	Posted
Alternator bearing part #?	4runnerpilot	03/20/10 09:03 PM
Re: Alternator bearing part #?	MI_Mitsu	03/22/10 04:12 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.481s Queries: 16 (3.479s) Memory: 0.5948 MB (Peak: 0.6277 MB) Data Comp: Off Server Time: 2026-06-08 05:28:35 UTC
Valid HTML 5 and Valid CSS