I'll start...

What vehicle type and year? 1995.5 Rodeo
[/b]Axle Used[/b]
front: v1 - waggy D44 converted to 8 lug. v2 - dodge D60
rear: v1 - cab n' chassis 14-bff. v2 - swap out to srw hubs
Leaf or Coil? Leaf, started out with wagoneer 4-pack
If Leaf,
Spring over or under?
spring over, shackle reversal.
Locker? If so, which one?
D44 was an OX then D60 a full spool.
How did you handle the steering issues?
D44 - histeer using SRE's. D60 - histeer w/ behind the knuckle tie rod and using ball joints.
In retrospect, what would you do differently?
dialing in the front spring rate as been difficult, battling firmness vs height, though flex never has been a problem. length and angularity for the front driveshaft has been a big concern with shackled reveresed SOA, probably my number 1 challenge in the project. some sort of histeer/crossover was a must. a few problems with undersized braking components after changing out the calipers on all four corners.

If you have a link to a discussion of you build, please include it.
I try to post pictures to all my projects at my website, www.zu4x.com, however, i've been having some difficulty mantaining the site lately and my gallery is currently down.


-Rob