Got it, I'm beginning to think that way myself.

The 2 bolts that hold the power steering fluid reservoir are the right size to get things moving. The bolts holding on the rear bumper corners also fit and are a little longer.



The leak is at the left end of the cylinder (good call off-roader).

I have the fsm (thanks for the download), and a Haynes manual, but this is the first time I've looked at the rear brakes on this car myself. Is there anything I should know about disassembly or reassembly that isn't mentioned in either of those?

Also, is this a job I can get done with a bunch of spanners, some pliers, and a screwdriver, or do I need any kind of special tools?

The brake drum and most everything in there is soaked with fluid. I'll need new shoes and a new cylinder, but will the drum itself be ok - just soap and water to clean it or does it need a solvent/gas/etc?



I realise most guys on this board could do this in their sleep, but it's a big job for me - I'm a gradeschool teacher, not a mechanic ..., so please excuse any stupid questions.