reasking a question about hubs just to be sure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

reasking a question about hubs just to be sure #994068 04/17/10 04:56 AM

Joined: Aug 2009

Posts: 288

Virginia

Red1979

Mudrunner

Ok tuesday I am finishing my gear swap and I am going with lockouts on the front....Mine is a 87 ram 50 and the hubs are on a....I would say between an 83 and 86 just want to be sure b4 I buy them

1987 Dodge Ram 50
2.6 5 speed
2 inch body lift 31x11.50 Swamper LTBs
4.62 gears lsd rear and welded front with lockouts
Weber carb waiting to be installed

Entire Thread
Subject	Posted By	Posted
reasking a question about hubs just to be sure	Red1979	04/17/10 04:56 AM
Re: reasking a question about hubs just to be sure	rxinhed	04/17/10 05:50 AM
Re: reasking a question about hubs just to be sure	PHIL_	04/17/10 05:58 AM
Re: reasking a question about hubs just to be sure	JohnnyBfromPeoria	04/17/10 06:15 AM
Re: reasking a question about hubs just to be sure	torquemonster	04/17/10 10:19 AM
Re: reasking a question about hubs just to be sure	Red1979	04/17/10 01:22 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.856s Queries: 15 (3.854s) Memory: 0.6036 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-06-17 02:36:04 UTC
Valid HTML 5 and Valid CSS