reasking a question about hubs just to be sure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

reasking a question about hubs just to be sure #994068 04/17/10 04:56 AM

Joined: Aug 2009

Posts: 288

Virginia

Red1979

Mudrunner

Ok tuesday I am finishing my gear swap and I am going with lockouts on the front....Mine is a 87 ram 50 and the hubs are on a....I would say between an 83 and 86 just want to be sure b4 I buy them

1987 Dodge Ram 50
2.6 5 speed
2 inch body lift 31x11.50 Swamper LTBs
4.62 gears lsd rear and welded front with lockouts
Weber carb waiting to be installed

Re: reasking a question about hubs just to be sure [Re: Red1979] #994069 04/17/10 05:50 AM

Joined: Feb 2005

Posts: 7,458

Montero Ranch

rxinhed

Trail Leader

The 4wd drive hubs are the same for the Monteros, at least, from 1983 to 1991. The Gen II Montero spindle may be different, but I wouldn't know that because I don't have any. However, the only difference in the Gen I Montero parts that mount to the hub are the brake disc for 4-cyl (early) and 4-cyl (late)/V6. You're probably not at risk mixing pickup parts around, but be aware of the disc diameter as the trucks received the larger rotors earlier.

Russell

1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya

Re: reasking a question about hubs just to be sure [Re: rxinhed] #994070 04/17/10 05:58 AM

Joined: Jan 2000

Posts: 7,309

Airdrie, Alberta, Canada

PHIL_

Trail Leader

I can confirm first hand that the hubs will fit up to at least 94 (and later): I put Aisin's on my genII. They fit. AFAIK Mitsu used the same hub from the beginning, until the genIII when they were no longer usable. So you should be good to go.

1991 HZJ77, 1999 KZJ90, 1999 UZJ100, 1992 M101CDN2
https://www.thegearheadproject.com/category/jdm-journeys/

Re: reasking a question about hubs just to be sure [Re: PHIL_] #994071 04/17/10 06:15 AM

Joined: Jun 2002

Posts: 6,211

Apache Junction, AZ

JohnnyBfromPeoria Offline

Trail Leader

Same Aisin manual hubs fit my '87 as my '95. It's what they come off of that is the question, if you're not buying new ones.

John B.

Re: reasking a question about hubs just to be sure [Re: JohnnyBfromPeoria] #994072 04/17/10 10:19 AM

Joined: Jan 2005

Posts: 1,538

Red Deer, Alberta

torquemonster Offline

Body Damage is Cool

yes...the Aisin Manual hubs will fit all GEN II trucks up to 2000.

Re: reasking a question about hubs just to be sure [Re: torquemonster] #994073 04/17/10 01:22 PM

Joined: Aug 2009

Posts: 288

Virginia

Red1979

Mudrunner

Ok thanks just wanted to be sure....by the way they are coming off of an eariler ram 50

1987 Dodge Ram 50
2.6 5 speed
2 inch body lift 31x11.50 Swamper LTBs
4.62 gears lsd rear and welded front with lockouts
Weber carb waiting to be installed

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: