reasking a question about hubs just to be sure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: reasking a question about hubs just to be sure [Re: JohnnyBfromPeoria] #994072 04/17/10 10:19 AM

Joined: Jan 2005

Posts: 1,538

Red Deer, Alberta

torquemonster Offline

Body Damage is Cool

yes...the Aisin Manual hubs will fit all GEN II trucks up to 2000.

Entire Thread
Subject	Posted By	Posted
reasking a question about hubs just to be sure	Red1979	04/17/10 04:56 AM
Re: reasking a question about hubs just to be sure	rxinhed	04/17/10 05:50 AM
Re: reasking a question about hubs just to be sure	PHIL_	04/17/10 05:58 AM
Re: reasking a question about hubs just to be sure	JohnnyBfromPeoria	04/17/10 06:15 AM
Re: reasking a question about hubs just to be sure	torquemonster	04/17/10 10:19 AM
Re: reasking a question about hubs just to be sure	Red1979	04/17/10 01:22 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.479s Queries: 16 (3.477s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-15 13:46:24 UTC
Valid HTML 5 and Valid CSS