Luckily the engine has not grown, nor has the truck shrunk...





There is still much to do. I had pretty much reached a point where things could be assembled no further with the engine outside the truck.

I've been doing work on the wiring as well...much sorting and labeling. That too is reaching the point where it needs to be put back in the truck. A lot of the 'final locations' of various connectors needs to be determined before splices are made.

I hope I'll be able to coherently document how I've done the wiring, but one problem I'm running into is that no matter how you arrange a bundle of wires, taking a picture of it still just looks like a big mass of wires. I'll figure something out...