Bling-bling y'all...

[Linked Image]

I may have to modify my MAF mount to get a bit of a better angle for the tube. The MAF coupling was 1/4" undersized, so it was a bit of a stretch fit. The throttle body coupling is 1/4" oversized, so I still need to find something to take up the gap.


I have also completed the fuel line modding...

[Linked Image]
Unmolested Gen 2 upper right

[Linked Image]
Molested Gen 2...connects directly to the Gen 1 frame-rail fuel lines.



I forgot to take a picture of the lines bolted to the firewall, but it's pretty straightforward. Here's what the Gen 1 looked like:

[Linked Image]


...and this is what the Gen 2 looks like:

[Linked Image]


Quote
...cut out a box in the floor and put the battery and electricals in there then route them to the engine bay.

This is kinda the idea I've been leaning toward...I need to start doing some investigating into what the structure looks like below the floor in certain areas.