Seat won't

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Seat won't "stand up" #995809 05/03/10 10:21 PM

Joined: Apr 2004

Posts: 373

Edmonton, Canada

The_Rusty_Gear Offline

Mudrunner

I'm trying to get my drivers seat "upright" again. At the most "upright" lock it is still reclined, and I *know* that it used to sit up straighter (even the passenger seat does so)

Is this a comon problem? Did I strip something in the seat? has something shifted? What should I look for?

I'm not really digging the Lay-Z-Boy driving position.

1988 4Runner, V6 Auto, Mostly Stock
32 x 9.5 Swampers

Entire Thread
Subject	Posted By	Posted
Seat won't "stand up"	The_Rusty_Gear	05/03/10 10:21 PM
Re: Seat won't "stand up"	Snowtoy	05/04/10 12:41 AM
Re: Seat won't "stand up"	missouriman	05/05/10 02:14 AM
Re: Seat won't "stand up"	The_Rusty_Gear	05/05/10 10:03 PM
Re: Seat won't "stand up"	Greg_Canada	05/06/10 04:10 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.474s Queries: 15 (3.472s) Memory: 0.6005 MB (Peak: 0.6335 MB) Data Comp: Off Server Time: 2026-05-30 22:47:24 UTC
Valid HTML 5 and Valid CSS