How to replace Ignition cylinder aka barrel Gen1

Print Thread

Rate Thread

Re: How to replace Ignition cylinder aka barrel Gen1 [Re: BoiseMontero] #995922 11/04/10 05:33 PM

Joined: Mar 2010

Posts: 64

Idaho

BoiseMontero Offline

Getting the Wheeling Fever

Just wanted to update this for anyone in the future. Landraider was right about getting the assembly off the column, then the real work started trying to get the old cylinder out of the assembly. There are a few spring pins that have to be pulled out, not punched through, I took it to a lock shop with my new cylinder, $20 and now it's all back in.

1989 SWB V6 5 speed 230K

Entire Thread
Subject	Posted By	Posted
How to replace Ignition cylinder aka barrel Gen1	BoiseMontero	05/05/10 03:40 AM
Re: How to replace Ignition cylinder aka barrel Gen1	zarktheshark	05/05/10 04:03 AM
Re: How to replace Ignition cylinder aka barrel Gen1	Cambo	05/05/10 04:37 AM
Re: How to replace Ignition cylinder aka barrel Gen1	LandRaider	05/05/10 07:39 AM
Re: How to replace Ignition cylinder aka barrel Gen1	StockRaider	05/05/10 08:01 AM
Re: How to replace Ignition cylinder aka barrel Gen1	BoiseMontero	05/06/10 04:56 PM
Re: How to replace Ignition cylinder aka barrel Gen1	BoiseMontero	11/04/10 05:33 PM
Re: How to replace Ignition cylinder aka barrel Gen1	off-roader	11/04/10 06:19 PM
Re: How to replace Ignition cylinder aka barrel Gen1	mxmikie	11/05/10 12:11 AM
Re: How to replace Ignition cylinder aka barrel Gen1	off-roader	11/11/10 12:49 AM
Re: How to replace Ignition cylinder aka barrel Gen1	BoiseMontero	11/11/10 11:43 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: