Crankshaft Pully Nut question.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Crankshaft Pully Nut question. [Re: toyhooter] #997345 05/20/10 12:53 AM

Joined: Apr 2007

Posts: 60

Southern, CA

toyhooter

Getting the Wheeling Fever

Cool. Thanks for all the info. Saved and printed.

ToyHooter
90 LWB Montero
Sliders, Dual Bouncies, K&N, Flowmaster, Rancho Stabalizer, KYB Gas Adjusts,
ARB Compressor Under Hood, ARB Locker Waiting Garage Floor, Spare Tire Bike/CB Ant Mount

"I didn't do it, you didn't see me, you can't prove it."
Bart Simpson

Entire Thread
Subject	Posted By	Posted
Crankshaft Pully Nut question.	toyhooter	05/19/10 02:04 AM
Re: Crankshaft Pully Nut question.	fasteddy	05/19/10 04:46 AM
Re: Crankshaft Pully Nut question.	toyhooter	05/19/10 06:15 AM
Re: Crankshaft Pully Nut question.	justice	05/19/10 07:22 AM
Re: Crankshaft Pully Nut question.	toyhooter	05/20/10 12:53 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.020s Queries: 16 (3.496s) Memory: 0.6006 MB (Peak: 0.6336 MB) Data Comp: Off Server Time: 2026-06-09 21:02:36 UTC
Valid HTML 5 and Valid CSS