Okay, so I've read about the Weber 32/36 and 38/38 replacement carbs for the 2.6L motor. Are there any other replacement carbs available out there, like from Holley, that are less expensive? If so, what are the part numbers and sources?
I've heard the 38/38 is the better choice as far as the Weber goes, to get more oomph out of the engine, whereas the 32/26 is a very minor improvement over the stock Mikuni?
I'm still trying to decide if I'm going to turbo my Monty and leave it carbed, or go with EFI. For ease of installation, I'm leaning towards a carbed setup, but will have to replace the stock Mikuni with something that can take the boost (7 psi, give or take). I really don't want to spend $450 for a Weber 38/38, then another $200 for the part that bolts to the top of the Weber carb that the turbo piping feeds into. I can probably get the EFI parts I need for less than half of that, but really don't want to deal with the headache of figuring out all the wiring and additional sensors, higher pressure fuel pump, etc.
So with all that being said, and knowing this replacement carb will be boosted, what's the general consensus regarding a good replacement carb that won't drain my bank account, keeping in mind I still have to get the part that bolts to the carb for the turbo piping to feed into?

1989 Monty SWB, 2.6L w/MT, 15" alloys, 265/75 Dunlop Radial rovers, rear air shocks, Weber 32/36, SQ oil cooler, (SOLD Oct 2012)
Southeast VA, USA