Quote
Question, the 97 MS used a 9" rear, right? I did that swap last year. I have the small front diff right now, but I can get the 8" front from Curt I bet (stock 89 v6). is the that 8" a HP or LP? My rig could really use some help turning my 34's.


89 V6 is an 8" LP. You will need MB241981 gears and some modifications.
But if you replace it to an 8" HP then you will need only the gears. 7.25" HP and 8" HP front diffs are interchangeable with no mods.
And in the case of a HP front diff you can keep CAD (central axle disconnect).

_________[...PART TIME REBEL...]_________
http://www.youtube.com/watch?v=UAiNfq_k1r4