Yes I agree upping the boost beyond efficiency will not yield lower EGTs, but most people aren't going to boost that high, especially with a little turbo like ours. Anyways, numbers are in, rather low, I'll blame some of that on the fact that the guy running the dyno wouldn't listen to me and put more than 20% load on the dyno, he thought 20% was more than enough.To me diesels respond to load and will only show their true numbers under load. It was free so I can't really complain. The lower numbers are stock, the higher numbers are 16psi and meth injection running with a bit of water on the intercooler (they just got their dyno and don't have adequate fans for cooling yet). 16psi was making the cooler waaayy too hot without adequate airflow.
[email]77hp@3900rpm[/email] and 132ft*lbs@2450rpm
[email]83hp@3550rpm[/email] and 145ft*lbs@2400rpm
Since the engine is rated at
Power ù 92 kW (125 PS) at 4000 rpm
Torque ù 294 NÀm (217 lbÀft) at 2000 rpm,
according to unreliable wikipedia, I was expecting a little more hp and quite a bit more torque. Next time I'll make him turn up the load in a comparison run to see if I'm correct with that.