10" DRUM BACKING PLATE - 4x4Wire TrailTalk

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

10" DRUM BACKING PLATE #999583 06/10/10 08:36 PM

Joined: May 2007

Posts: 93

Mikewarme

Getting the Wheeling Fever

Anybody out there have a backing plate left side for a Mighty Max pickup or ram50 from years 83-89 4wd? its the 10" brake setup. I confirmed with Mitsu its the same part for those years. Of coarse its no longer available from Mitsu.
Thanks Mike

Must be nice condition ill pay good money for it. Doing a frame off rebuild on a 85 power ram diesel

Entire Thread
Subject	Posted By	Posted
10" DRUM BACKING PLATE	Mikewarme	06/10/10 08:36 PM
Re: 10" DRUM BACKING PLATE	rxinhed	06/11/10 06:04 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.423s Queries: 15 (3.421s) Memory: 0.5925 MB (Peak: 0.6255 MB) Data Comp: Off Server Time: 2026-06-01 09:42:15 UTC
Valid HTML 5 and Valid CSS