weber and exhaust for a 87 2.6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: weber and exhaust for a 87 2.6 [Re: runningbird] #999729 06/12/10 02:49 PM

Joined: Jun 2002

Posts: 6,211

Apache Junction, AZ

JohnnyBfromPeoria Offline

Trail Leader

On the Gen 1 you can just take the bottom half of the fan shroud off and leave the top half in place with a body lift, or relocate the radiator 2" (or whatever the body lift height is) lower with a bit of metal strap attached to the top two mounting holes. You'd just drill new holes in the radiator flange for the bottom two holes. Not hard at all.

I've done a few body lifts, and there are a couple of how-to's in the archives.

John B.

Entire Thread
Subject	Posted By	Posted
weber and exhaust for a 87 2.6	runningbird	06/11/10 09:03 PM
Re: weber and exhaust for a 87 2.6	JohnnyBfromPeoria	06/11/10 09:31 PM
Re: weber and exhaust for a 87 2.6	socal1200r	06/11/10 10:53 PM
Re: weber and exhaust for a 87 2.6	runningbird	06/12/10 12:07 AM
Re: weber and exhaust for a 87 2.6	JohnnyBfromPeoria	06/12/10 03:06 AM
Re: weber and exhaust for a 87 2.6	hazy_daze	06/12/10 05:28 AM
Re: weber and exhaust for a 87 2.6	plh	06/12/10 12:55 PM
Re: weber and exhaust for a 87 2.6	runningbird	06/12/10 02:33 PM
Re: weber and exhaust for a 87 2.6	JohnnyBfromPeoria	06/12/10 02:49 PM
Re: weber and exhaust for a 87 2.6	runningbird	06/12/10 02:54 PM
Re: weber and exhaust for a 87 2.6	Kevin C	06/12/10 04:49 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: