Last month I installed my front Addco sway bar and I've noticed over time that the bar shifts from side to side within the mounting brackets slightly. No more than 1/8 of an inch to either side. I noticed this because the grease near the mounting brackets is "pushed" away from the edges of the bushings.

Is this normal or OK? When I removed my stock front bar I didn't notice any evidence of shifting like this. That's why I'm wondering.

Should I tighten the bolts any more? Thanks.

http://community.webshots.com/user/medmaker100
Wheelwell lights, PIAA 959's under valance, Grant Burlwood steering wheel, Bilsteins X 4, Michelin Cross Terrain SUV's, Clear Bumpers, Deckplate, Front/Rear Addco bars, 1.5 Lift on a 4X2